Изделие |
|
Вид | Finger Joint Cutter |
---|---|
Происхождение | Германия |
Регион | Baden-Württemberg |
Название изделия | Hochleistungs-Minizinkenfräser |
Спецификация |
|
Тип основных материалов | Железо |
Объем | 1 - 1 штук Одноразово Конвертировать |
Размеры | 4-5.5; 6-7 mm |
Описание |
The finger joint cutters with short finger lengths of 4/4.5 mm or 6/7 mm and a higher number of cutting edges meet both requirements. Due to the low cutting pressure, it cuts broad cross joints, depending on the machine, into short slats starting at approx. 250 mm without risking a lever-effect at feed speeds up to 52 m/min. RPMs and finger jointing quality are the same as with milling cutters with less cutting edges.
- Cutting material: high-alloy tool steel [HS Solid 24] - Run out accuracy of 5μm thanks to high precision manufacturing of the tool body Advantages: - Double feed speed possible with the same RPM and finger joint quality - Reduced risk due to stringing up short cuts of woods - Less chipping when removing the cutter from the wood, even if the milling cutter is reaching the end of its service life. |
Цена и условия |
|
Стоимость | Под заказ EUR за штук Конвертировать |
Инкотермы | EXW - франко завод Страна Германия Регион Baden-Württemberg |
Крайний срок поставки | На складе |
Продает в: | По всему миру |
By registering you agree to our Общие Условия
Информация, которую мы используем для построения рейтинга: